Model: GNR_11_Foot_9_Inch_6_Wheel_Bogie.zip
Scale: 4mm/1ft
Creator: Mike Trice
License: Creative Commons CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/)
Description:
3D Model representing a GNR 11’9″ 6 wheel carriage bogie. The stls have been broken down into their component parts. End user will need to devise their own orientation and supports to suit their printer and may choose to composite elements into larger printable structures.
Two types of bolster springs were fitted, cross leaf springs and coil springs. Both versions are included. The bogie is designed as a rigid bogie with 2mm holes for brass bearings to be added.
There might be a few model issues which the end user may wish to address. Cura may report issues in some cases however they still print ok.
Files included:
GNR_11_Foot_9_Inch_6_Wheel_Bogie_Coil_Spring_Bolster_x8.stl 8 needed for a pair of bogies.
GNR_11_Foot_9_Inch_6_Wheel_Bogie_Cross_Spring_Bolster_x8.stl 8 needed for a pair of bogies.
GNR_11_Foot_9_Inch_6_Wheel_Bogie_Mounting_Plate_x2.stl 2 needed for a pair of bogies.
GNR_11_Foot_9_Inch_6_Wheel_Bogie_Sideframe_x4.stl 4 needed for a pair of bogies.
GNR_11_Foot_9_Inch_6_Wheel_Bogie_Top_Plate_x2.stl 2 needed for a pair of bogies.
Files are supplied as-is and no support from the original creator is offered.