GNR_Dia_303_Full_Brake_6_Wheel_Coach_v2.zip
Scale: 4mm/1ft
Creator: Mike Trice
License: Creative Commons CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/)
3D Model representing a GNR Diagram 303 Full Brake (body dimensions 29’0″ x 7’6″) 6 wheel carriage. The stl is as supplied to Shapeways but has been broken down into its component parts. End user will need to devise their own orientation and supports to suit their printer and may choose to composite elements into larger printable structures.
Not supplied are floor, partitions and seating. Note that the ends rebate into the sides (see image in images directory). Underframe was designed to use sprung etched outer w-irons. Buffer bases on ends are intended to accept sprung heads such as those from Wizard, MJT, Alan Gibson etc.
All these files have successfully printed at Shapeways having passed their rigourous model vetting process, however there were still a few model issues. This v2 release has had the issues resolved.
Files included and number of times they must be printed:
GNR_Dia_303_Full_Brake_6_Wheel_Coach_End_With_Steps_x1.stl One required
GNR_Dia_303_Full_Brake_6_Wheel_Coach_End_x1.stl One required
GNR_Dia_303_Full_Brake_6_Wheel_Coach_Guards_Lamp_x2.stl Two required
GNR_Dia_303_Full_Brake_6_Wheel_Coach_Gas_Lamp_x3.stl Three required
GNR_Dia_303_Full_Brake_6_Wheel_Coach_Roof_v2_x1.stl One required
GNR_Dia_303_Full_Brake_6_Wheel_Coach_Side_v2_x2.stl Two required
GNR_Dia_303_Full_Brake_6_Wheel_Coach_Solebar_v2_x2.stl Two required
GNR_Dia_303_Full_Brake_6_Wheel_Coach_Torpedo_Vent_x6.stl Six required
Files are supplied as-is and no support from the original creator is offered.